Sunshades

Magic Mobility’s customised sunshades will protect you from the sun and harmful UV rays.  We recommend that you consider a sunshade at the time of your wheelchair fitting and purchase, however they can be retrofitted to your existing wheelchair if required.

Our sunshades are built from sturdy metal framework with a chrome or powdercoat finish. They include a high-quality black fabric shade and are manufactured in our Melbourne factory.

We also have the capability to fabricate and upholster custom sunshades. Please contact us to discuss your needs with one of our wheelchair specialists or agents.

Cup Holders

Magic Mobility’s standard designed cup holders can be mounted on your armrest and fitted on the left or right side. They come standard with a 90mm internal diameter, however can be customised further to your individual needs.

Alternatively, you may consider one of our RAM Mounts® cup holders. Its gimbal configuration enables the cup to remain steady and flat as you drive over bumpy surfaces. The internal diameter at the bottom is 84mm. RAM Mounts® cup holders can be fitted to the armrest or at the rear of the wheelchair for the attendant to monitor. There are some constraints to where it can be mounted, depending on specific wheelchair model specifications.

Please contact us to discuss your needs with one of our wheelchair specialists or agents.

Cane/Stick Holders

Magic Mobility can customise cane holders specifically for your wheelchair. These are totally customised to perfectly match the type of cane/crutch/stick that you use.

Customised cane holders are best ordered at the time of purchasing your new wheelchair. This allows us time to ensure the configuration you’ve chosen for your wheelchair is suitable.

When ordering, please specify your cane/crutch size and which side of the wheelchair you want it mounted.

Please contact us to discuss your needs with one of our wheelchair specialists or agents.

Accessory Chargers

Accessory Charger (1 x 12V & 2 x USB ports):  The accessory charger for 12V & USB devices, allows you to charge up to three external devices from your wheelchair.  The following sockets are available:

  • 1 x 12V device (up to 5 Amps) – the 12V device uses a standard “cigarette” style connector
  • 1 x 5V USB device (up to 1 Amp)
  • 1 x 5V USB device (up to 2.1 Amps)

Accessory Charger (2 x USB ports):  The accessory charger for USB devices, allows you to charge up to two external devices from your wheelchair via 2 x 5V USB devices (up to 2.1 Amps).

Our accessory chargers can be fitted to all Magic Mobility powerchairs which use the R-Net system.  The charger is mounted on the same side as the joystick and is fitted beneath the armrest unless otherwise requested.

Please contact us to discuss your needs with one of our wheelchair specialists or agents.

Bluetooth and iDevice Module

The R-net bluetooth modules allow wheelchair users to control a bluetooth enabled device either through a joystick or via a single input device (SID) connected to the R-net Omni. Typical applications include PC mouse control or operation of a smart device.

Android Devices:  A list of R-Net compatible devices can be found at www.pgdt.com/smartdevices and the R-net for Android App is available from the play store; search for “PGDT”, “R-net” or “R-net for Android”.

iDevices:  The R-net iDevice Module allows pairing with an iPad or an iPhone. Once paired, the iDevice Module uses the accessibility options switch control or voice control to allow R-net input device commands (joystick nudges) to control or access any of the applications of the iDevice.

Please contact us to discuss your needs with one of our wheelchair specialists or agents.

Rims for 14" Off-road Knobby Tyres

We now offer a choice between Silver and Black Rims for our 14″ Knobby Tyres.

These off-road tyres can be fitted to our Extreme X8, Frontier V6-AT and Frontier V4 FWD and RWD power chairs.

Please contact us to discuss your needs with one of our wheelchair specialists or agents.

14" Hybrid Wheels

Our Hybrid wheels are 14″x 3″ and available in black and grey.  The larger wheels provide driving comfort, enabling users to go further and push boundaries.

Please contact us to discuss your needs with one of our wheelchair specialists or agents.

Puncture Resistant Tyre Liners

Magic Mobility worked with an Australian rubber manufacturer to develop an Aramid Fibre reinforced rubber compound for puncture resistance.  The challenge was to ensure that our off road knobby wheels could still maintain the extremely low psi.

Please contact us to discuss your needs with one of our wheelchair specialists or agents.

RAM Mount® Systems

RAM mounting systems are now available for Magic Mobility power chairs.

Seven new RAM mounting systems are available for you to mount a range of devices including phones, cameras, tablets and cups to nearly anywhere on your chair, so that you can work with whatever they need.

RAM mounting systems include:

  • tablet holder
  • swing away tablet holder
  • mobile phone holder
  • swing away camera mount
  • attendant cup holder
  • action camera holder and
  • cup holder

Please contact us to discuss your needs with one of our wheelchair specialists or agents.